Caring for Your Projector

• Air flow: keep vents clear. Clean or replace the air filter on the schedule in your manual, more often in dusty spaces or with haze and fog.
• Lens: keep the lens cap on when not in use. Clean only with a blower and lens tissue or a microfiber cloth made for optics; never spray liquid onto the lens.
• Power down properly: use the power button and let the projector finish its shutdown before cutting power at the breaker or power strip.
• Transport: remove the lens if the manual says to, and use a padded or fitted case.
• Environment: avoid moisture, high heat and direct haze output into the projector.
• Firmware and hours: note light-source hours each season.

Need service? See Projector warranty and service.